top of page
We have what you need!
INVENTORY
2012 LinkBelt 160x2 - $57,000
One owner LB160 w 6900 hours. Motor replaced by local dealer with all records. The IV has new rails sprockets and rollers manual thumb. Everything works as it should this is a nice used legal width machine for the owner. Needs nothing!
2012 Deere 135d - $62,500
A nice pre-emissions legal load Deere 135. The machine has 4900 hours and the UC is good as the Rails and sprockets were changed about 800 hours ago. Machine has 2 buckets 18” and a 36” bucket w a manual thumb bracket. This is a nice machine and everything works - cold air and the machine is tight used mostly in Utility work.
2021 LinkBelt 160x4 - $105,000
Here’s a nice one owner LB 160 w 2900 hours. It has a hydraulic thumb and a good UC because it has a few hundred idle hours! Everything works like new tight and straight.
2023 Deere 160g - $187,000
“LIKE NEW” Deere 160 with ONLY 900 hours and a hydraulic thumb! Machine is perfect just going to a bigger machine. Machine still has warranty and extra warranty is available for purchase as well. A new one is around $220 plus 10% tax!
CAT D6K - $88,000
A one owner operator CAT D6K for sale. The machine just had all new UC except the groused pads. Machine has 4000 hours and has been on a local farm. Cab with cold air-Sweeps-screens- this dozer is clean and straight and everything works perfect.
LinkBelt 250X4 - $155,000
This LinkBelt 250X4 is super clean it ONLY has 2000 hrs and it mostly been used for utility work (which has lots of idle hours). The machine has Catwalks all the way around and it has 2 buckets with auxiliary hydraulics! UC is 80% plus and has back up cameras. I have a 49” bucket available it’s like new but it currently has a 24” utility bucket.
2023 FECON 135 vrt - $155,000
Like new ONLY 260 hours FECON 135 VTX industrial mulching track machine w 180 D Dennis Cimaf mulching head! It comes w a bucket and the mulcher and I have a FECON Stump grinder and Cat grapple bucket that will also be available for additional coats. I’ll have pics of the grinder and grapple bucket.
2020 Deere 700K LGP - $137,500
A nice clean Deere 700k. GPS ready and this machine has only been used to build pads for buildings. Undercarriage is good- machine is straight and strong. This dozer has been lightly used and hasn’t pushed anything near what this dozer can push!
2009 Caterpillar 320 dl - $63,000
A very nice one owner Pre-Def Cat 320DL for sale. This machine is very nice for the age and hours. 8000 hours very good UC has quick couple and extra bucket available. This machine had one operator and it’s obvious on its appearance and operational functions. If you're looking for a turn key machine this is your rig. Machine will be working and hour meter will gradually increase.
2013 Hitachi 210LC-5N - $127,500
LOW hour (2400 hrs) Pre-Emmisions 1 owner machine w Hydraulic Thumb
2015 KOMATSU PC 170 LC-9 - $85,000
I have a very clean and tight 170 with only 5000 hours- It will come w a 36" bucket and has a quick coupler and I have a manual thumb available. Price is FIRM $85,000
2010 CAT 324 DL - $69 FIRM
6000 hrs- Pre Def-good UC- total AC rebuild by Cat dealer- catwalks - nice tight machine
2014 Bobcat t590 - $25,000
Bobcat T590 for sale. The unit has 1900hrs and it’s a 2014 model. UC is 40-50% and everything on the machine works as it should. It’s a good lil rig.
2016 CAT 323 - $120,000
6200 hours and a newer Esco manual thumb. UC is good and was replaced around 4000 hours. The machine has grade control and has hydraulics for a Hyd quick coupler! I have a 3D Trimble system that can go with the machine for additional cost! Machine has had the stick bucket pins and bushings redone. This rig is tight and ready to work ZERO issues!
2018 Caterpillar cp56-b - $85,000
Cat pad foot roller for sale. Everything works perfect and it pounds the dirt hard. It has a pusher blade on the front and the machine is tight and only has 2975 hours. The only reason selling is because we upgraded to a fully cab unit.
2018 Takeuchi tl10v-2 - $38,000
Here is a great running TL10V-2 it has 3300 hours can heat air -High Flow Hydraulics 10,500lb-90HP- good UC and everything works as it should. Machine is stout and tight.
2012 Case 590 - $55,000
One owner work horse! The Case 590-N. This isn’t your traditional backhoe. This machine has Pilot Control(joy stick) more horsepower, wider loader bucket wider stabalizer stance, larger rear and front tires, wider tire stance, heavier axles...its just a heavier built rig. Cold air cab, Ext Hoe and ready to work!
2015 Hitachi ZX 210-LC5N - $115,000
A very nice LOW hour (2900) Hitachi 210. Hitachi is a Deere w a Isuzu engine everything else is exactly the same as a Deere!! It has a progressive link Hydraulic Thumb and has a good UC around 60-70% Everything works it’s a good tight straight machine.
NEW 2023 Takauchi TB 290 - $117,0005
Comes with a 5 year 5000 hour warranty and 3 buckets!
2000 Caterpillar D4C XL - $35,000
Cat D4C w 7600 hours. Machine has a good UC w fairly new rails and sprockets and a few rollers. Machine is currently working in Conway AR and hours will go up gradually.
2020 Bobcat t66 - $45,000
Bobcat T66 w only 1250 hours. It has a standard bucket. Machine is like new just upgraded to a cab unit. Great UC straight clean and tight machine.
2017 Deere 310sl hl - $65,000
Deere 310SL-HL backhoe. This backhoe has 3500 hrs and runs like a new one. It’s not only the turbo series but it has a bigger pump for heavy lifting (HL). Machine has a hydraulic thumb w easy fold forks! Very clean and tight price is FIRM at $65,000!
2006 Deere 230C LC - $60,000
Here is a nice Deere 230 w 8000 frame house but engine was o we hauled at 6000 and all the paperwork is in a file. The UC is good and it was also replaced when the motor was done. It has Aux Hyd and has a Hyd quick couple w your choice of buckets a 24” or a 48”. Machine is straight and tight and everything works as it should cold air and Lincoln auto grease system!
2023 Fecon 135 VRT - $155,000
Here is a like new FECON 135 with Blackhawk mulching head. This is the baddest forestry mulchers on the market! ONLY 600 hours! Warranty is transferable and I have a couple attachments that can be purchased for additional cost!
2006 Kenworth T800 - $147,000
LOW mileage Kenworth dump truck….. it’s a 2006 year model and it’s has 10 speed and full lockers ….. C11 cat tuned to 425 HP…. This rig has 96,800 original miles and is immaculate!
It was an oilfield truck with office on the back. The truck literally just idled.
2007 Case 1650k xl - $87,000
A diamond in the ruff!!!! One owner Case 1650K w ONLY 1200 ORIGINAL hours. This machine was bought new and sat in a farm in NW Arkansas! It’s is literally like NEW! Kept in a barn and is extremely tight and everything works like new! Sweeps/ Screens and blade has zero if any slack. Machine is approx 38,000lbs.
2000 John Deere 310e - $22,000Here’s a nice Backhoe from the city of Jonesboro that has been serviced just as they should. It just hit 7000 hours w as it’s 4x4 w a extended Hoe and it has a clamshell (4-n-1) bucket. It’s cab w cold air and heat. Everything works just like it should and it’s a good cheaper backhoe.
bottom of page